With the demand for data increasing rapidly, alongside the customer requirement for coverage everywhere, regardless of location, the next generation of DAS provides mobile operators and building owners with a flexible, scalable system that meets this demand. Digital Distributed Antenna System (DAS) – provides an adaptable, customizable and expandable cellular and data coverage solution for multiple operators and services over a common infrastructure.

Multi-Band Digital Optical Transport System is designed to integrate multi-band systems and extend the coverage of Public Safety Radio and Commercial Cellular into large Public Venues, such as Hospitals, Hotels, Shopping Malls, Office Buildings, long Tunnels sections and large area outdoor coverage. Remote Unit Cascading and Fiber Loop Redundancy are supported.

The fully digital DAS platform uses a completely flexible CPRI-based high speed digital transport fabric. System nodes (Head ends and Remotes) are interconnected to suit the system requirements, with topologies from simple star connections to full mesh interconnection supported to suit all types of application and needs for redundancy and routing bandwidth.

The system software automatically registers connected nodes and adapts to provide the best routing, with deterministic routing delay allowing tight control of timing between MIMO and aggregated carriers.

• APOI is an Active Point of Interface used to connect various DAS feeders like BTSs (Base Transceiver Stations), Small Cells, or RRHs (Radio Remote Heads) and/or an Off-Air Repeater to the digital DAS system.
• The supported services are: 800, 900, 1800, 2100, 2600 plus 700LTE, SMR 800, Cellular 850, 1900 and AWS. Each BTSI can be either un-duplexed (separate ports for TX/RX) or duplexed (single port for TX/RX) configuration. Thus allowing different connections to different BTSs

High Power Remote units achieves +43 dBm RF output power per band in all bands supporting multi-operator and multi-band operation from 700 to 2600 MHz. The digital remote unit is an IP65, outdoor as well as indoor, four-band remote unit, where two units can be cascaded through a CPRI link to support eight bands. Each band can provide high-power of +46dBm per band.

Technologies covered:
700MHz / 850MHz / 900MHz / 1800MHz / 2100MHz / 2300MHz and 2600MHz

High power remote node for Public Safety achieves +46 dBm RF output power for PS-LTE bands and +40 dBm for UHF / TETRA. Up to 4 different bands can be fitted into the same enclosure and different technologies can be supported from the same unit. Our Public Safety remote unit is small, light weightand requires no cooling fans. This is particularly important since remote units are often installed in harsh environments such as tunnels, where air filters regularly need replacing. The absence of fans, and an IP65 environmental rating, make the Remotes maintenance free. Technologies covered:

AM/ FM and DAB for Broadcast Radio,
VHF / UHF / 700MHz / 800MHz and 900MHz for Paging, Two-Way Radio

• ALL Digital Software and Hardware Platform
• CPRI Transport OMU to ORU’s
• Capacity Accumulation Unit (Active POI) MIMO Support Automatic Output Power Level for all Operators / Bands
• Optional GUI Adjustment of Output Power Level per Technology Optional High Power Common Output Local and Remote Access with SNMPv3 support with MIB File
• Up to 8 ORU Cascade connectivity with Fiber Loop Redundancy or Optical Bypass Modules to insure integrity of Cascade Chain. Supports up to 32 Remote Units with Cascading connection
• Optical Bypass Module in each ORU in case of fault to maintain Cascade integrity
• Up to 8 3GPP Bands (FDD & TDD) in one OMU & 5 in one ORU
• Supports all Bands from 700-2700MHz Scalable ORU DL Composite Power: +24 dBm to +46 dBm per Band for FDD and +43 dBm for TDD.
• Optional GUI Based Spectrum Analyzer, UL on OMU and DL on ORU’s
• Optional Sectorized Architecture
• Supports upto 10Gb/s Digital Optical Fiber Speed for LTE Advanced time delay compensation function for each Remote Unit to avoid time dispersion issues
• IP-67 supported and Wall Mounted or Pole Mounted for Remote Unit and Head-End Unit.

• ALL Digital Software and Hardware Platform
• Public Safety VHF Band Radio support
• Simplex system support
• Combined Channelized Simplex Off-Air Repeater and Optical Master Unit in the same case (Head-End Unit)
• Star connection & cascading connection options
• Supports up to 8 Remote Units cascaded per optical port
• Supports up to 32 Remote Units with Cascading connection
• Supports up to 4 Remote Units with Star connection
• Optical Bypass Modules included in each ORU in case of fault to maintain Cascade integrity
• Optional >>> Radiating Cable Distance to Fault Measurement System

• Optional Redundant Head-End (Repeater + OMU)
• solution with additional Head-End at opposite Tunnel Entrance
• Redundant Power supply support in MU and RU
• RF composite DL Output power up to +33dBm
• Supports up to 10 Gb/s Digital Optical Fiber Speed
• RJ-45 Port in OMU Unit to support Local Control and Alarming via software
• Optional Remote Control and alarm with modem
• IP-67 Wall Mounted or Pole Mounted for Remote Unit and Head-End.
• Optional Head-End Unit Mountable in standard 19” Rack Case
• Two Donor Antennas required with a minimum of 80 dB isolation between them